LT Line Testers
The Staht LT tests 8 mm swage terminations on safety lifelines, up to 25 kN.
Swage and lifeline testing with the Staht LT
The Staht LT (line tester) is for testing 8 mm (7x7 or 1x19) cable terminations, the swages typically found on safety line systems, up to 25 kN (5,620 lbf). It clamps to the cable and uses a Staht t25 load cell to apply and measure the load, so the test is recorded in the Staht Connect app like any other.
The manufacturer of the safety line system gives the force to apply to the line, so check their test guidance before you start.
Three kits
- Kit 1: the line tester frame, M16 sealed thrust nut, anti-rotation spanner, 17 mm socket and ratchet, wrist lanyard and net bag, in a heavy duty case. For people who already have a t25.
- Kit 2: Kit 1 plus a t25 load cell, USB-C cable, 24 mm reversible ratchet spanner and tool lanyard.
- Kit 3: Kit 1 with a complete t25 digital pull tester kit, so the same kit also tests anchors and eyebolts.
Where a lifeline has a slip indicator at the front of the swage, the LT extension adaptor bypasses it. Replacement clamp plates, collets, feet, grips and nuts are below.
Watch how to use the Staht LT swage tester.
For inspectors: testing a horizontal lifeline's anchors, swages and posts.
Questions and answers
Swage terminations on 8 mm (7x7 or 1x19) wire rope, as used on safety lifeline systems, up to 25 kN.
Kit 1 if you already own a Staht t25, Kit 2 if you want a t25 load cell with it, and Kit 3 if you want a complete t25 pull tester kit as well, for anchors and eyebolts.
The manufacturer of the safety line system gives the test guidance and the force to apply. Follow theirs.
Yes. The LT extension adaptor fits the LT and bypasses a slip indicator at the front of the termination.











