Accessories

The Staht In-Line Test Kit, is a modular accessory which works with the Staht t25 load cell to measure force of up to 25kN (5620 lbf) between two points.   I...

Set of 4, 100mm Aluminium extension legs. To extend the t60 and t25 standard bridge height.

For use with the Staht LT (Line Tester) when testing safety lifelines with slip indicators fitted to the front end of termination (swage). The extension adap...

The Staht padded bag is a durable lightweight option for carrying the tester and accessories to the job site. It features a carry handle, shoulder strap and ...

Made from hardened and tempered chrome vanadium with a comfortable rubber handle. It incorporates a bi-hexagonal 15 degree offset ring, possessing a reversib...

M24 Threaded Adaptor fits directly to the t60/t25 M16 drop rod. ONLY 1 SUPPLIED.

For use with the tool adaptor jaw when testing threaded anchors or studs. Threaded washers are available individually in M6, M8, M10, M12, M16 & M20 sizes.

M30 Threaded Adaptor fits directly onto the t60 or t25 M16 drop rod. ONLY 1 SUPPLIED.

For use when testing a fastener to failure. It allows a greater pre-load to be applied to the top nut and prevents rotation of the drop rod and accessories.

For use with the Staht 60kN Digital Pull Tester Load cell (Part No. 601-015). The trapezoidal 16mm rapid advance drop rod requires no lubrication or bearings.

This kit includes M16 Sealed Thrust Nut, M16 Drop Rod (fine) and Anti-Rotation Nut & Handle. Can be used on both the t25 and t60 pull testers. Rated to M...

Staht socket wrench, chrome finish with black handle. 3/8" drive, reversible, 180mm length.

For use with 375/575 span bridges. The Drop Rod will connect to either the Clevis (p/no 601-010 /TDS 108) or Tool Adaptor Jaw (p/no 601-022 /TDS 109), which ...

For use with 375/575 span bridges. The Drop Rod will connect to either the Clevis (p/no 601-010 /TDS 108) or Tool Adaptor Jaw (p/no 601-022 /TDS 109), which ...

M27 Threaded Adaptor fits directly to the t60/t25 M16 drop rod. ONLY 1 SUPPLIED.

The Staht Shear Test Rig is a modular accessory which works with either the Staht t25 or t60 load cell to verify the shear performance of anchors in construc...

This tough and durable black case, with a comfortable grip handle, is IP67 certified. It is provided with a custom high density foam insert designed to prote...

The bridge is designed to work with the Staht Load Cell (part no. 601-015) to proof load test anchors and safety eye bolts up to a maximum load of 60 kN. T...

The Tool Adaptor Jaw is used in conjunction with threaded and slotted washers to test anchors, bolts and studs. Connects to the Drop Rod (Part No 600-008). T...

The bridge is designed to work with the Staht Load Cell (part no. 601-031) to proof load test anchors and safety eye bolts up to a maximum load of 25 kN. T...

Requires M16 drop rod (Metric Fine) and can be used with both the t25 and t60 testers. Rated to Max 60kN.

For use with the tool adaptor jaw when testing headed bolts. Slotted washers are available individually in M6, M8, M10, M12 & M16 sizes. Plastic packagin...

For use with the tool adaptor jaw when testing threaded anchors or studs. Threaded washers are supplied in a plastic box and the following sizes are included...

This tough and durable black case, with a comfortable grip handle, is IP67 certified. It is provided with a custom high density foam insert designed to prote...

For use with the tool adaptor jaw when testing headed bolts. Slotted washers are supplied in a plastic box and the following sizes are included: 1 x M6 1 x M...

For use with the tool adaptor jaw when testing threaded anchors or studs. Threaded washers are supplied in a plastic box and the following sizes are included...